|
M + M Webb & Sons
SAWING MACHINES
BAUER VERTICAL BANDSAW, throat 395mm, daylight 225mm, Table 520mm x 460mm.
blade welder. year 1995.
BAUER VG 450 VERTICAL MITRE CUTTING BANDSAW, Hydraulic mitre adjustment,
cutting capacities 90° 450mm x 490mm, 45° left and right 450mm x 320mm, 30° right
450mm x 230mm, Hydraulic feed, hydraulic clamping, digital display of mitre angle,
coolant. Year 1997.
BOMAR ERGONOMIC 275. 230 DG HORIZONTAL BANDSAW,
Double mitre, hydraulic downfeed, coolant. Year 2004.
FOM MIRAGE AUTOMATIC ALUMINIUM CUT OFF SAW,
400mm blade, feed device maximum stroke 600mm, horizontal and vertical
clamping, mist spray lube. Serial no:XZ 10029. Year 1997.
HYD-MECH S-20 PIVOT STYLE HORIZONTAL BANDSAW,
Rectangle capacity 330mm x 457mm at 90°, round capacity 330mm.
Mitre up to 60°, coolant. New machine.
LFS 30/1000 FRICTION SAW FOR CUTTING GRILLE FLOORING,
600mm blade, 22 kw main motor, length of cut from 1100mm,
Double sided clamping, variable speed feed, input and output rollerways with manual
measuring head. Made to order.
JAESPA ASH 15 VERTICAL BANDSAW, 1500mm throat, 1200mm daylight
between the guides, the machine travels on rails by hydraulic feed cylinder, the blade is
turned so the machine cuts to the back of the throat, hydraulic blade tension and guide
rod cylinder up and down. Serial no: 683324.
KALTENBACH KKS 401 UPSTROKING COLD SAW, with horizontal and vertical
clamping, with nc touch and go measuring head.
KALTENBACH TL 400 NON-FERROUS SAW, 400mm blade,
Manual up-cutting, pneumatic clamping, mist spray coolant.Serial no: 31475.
KALTENBACH KKS 350 UPSTROKING COLD SAW, 350mm blade,
Manual clamping, coolant. Serial no: 13244
KALTENBACH KKS 400 E UPSTROKING COLD SAW,
400mm blade, horizontal and vertical clamping, 3000mm of in feed rollers,
4000mm of out feed rollers and manual measuring head, coolant.
Serial no: 119902. Year 1998. Very good condition.
KASTO GKS 400 AU AUTOMATIC COLDSAW, with 1200mm shuttle feed x 3.
Horizontal and vertical clamping, 400mm blade, coolant
MEP SHARK 260 CCS SWIVEL HEAD HORIZONTAL BANDSAW,
Mitre up to 60°, capacities up to 225mm round, 200mm square,
270mm x 200mm rectangle, hydraulic downfeed, coolant. New machine.
MEP SHARK PH 261 SWIVEL HEAD HORIZONTAL BANDSAW,
Pull down, mitre up to 60°, capacities 210mm round, 200mm square,
240mm x 160mm rectangle, coolant. New machine.
MEP FALCON 275 PULL DOWN COLD SAW, mitre 45° left or right hand,
capacities up to 80mm round, 70mm square, 100mm x 60mm rectangle.
On pedestal, coolant. New machine.
MEP SHARK 281 CCS SWIVEL HEAD HORIZONTAL BANDSAW,
Mitre up to 60°, hydraulic downfeed, quick positioning vice, 2 speed,
Capacities 250mm round, 230mm square, 280mm x 200mm rectangular,
Coolant. New machine.
SIMEC MEC 120 M 1L AUTOMATIC COLDSAW, with 6000mwm bunker feeder, manual
mitre left or right hand. Serial no: 3486. Year 2000.
STARTRITE 14-S-5 VERTICAL BANDSAW, 340mm throat,
275mm under the guides, speeds 980-5600 fpm, for wood / plastics. Serial no: 22915.
STARTRITE 20 RWS VERTICAL BANDSAW, 500mm throat,
Height under guides 250mm, speeds 50-3000 ft/per minute,
table 500mm x 500mm, rack and pinion table feed, blade welder.
THOMAS TRAD 270 PULL DOWN HORIZONTAL BANDSAW,
0-60° mitre, quick release clamping, coolant. Year 2000
MILLING MACHINES
ARBOGA EM 825 MILL / DRILL, table 565mm x 245mm, manual movement only, daylight
400mm, geared head, speeds 100-2900 rpm, Light, 3 phase.
BRIDGEPORT TURRET MILL, variable speed head with 2 hp motor,
Imperial, longitudinal powerfeed, 2 axis digital read out, splash tray.
Serial no: 384231183W.
COMET X8130 UNIVERSAL TOOL ROOM MILL, standard table 750mm x 300mm,
universal swivelling table 625mm x 250mm 40 int spindles, rise, fall and longitudinal
powerfeeds and rapids. Serial no: CNM002.
KONDIA FV 1 TURRET MILL, table 1525mm x 230mm, 30 int spindle, Belt change head,
longitudinal powerfeed, dual dials, digital read out, Coolant.
MOSTANA 6M 13Y VERTICAL MILLING MACHINE, Metric,
Table 1700mm x 400mm, longitudinal travel 1000mm, spindle nose to table 450mm,
speeds 40-2000 rpm, powerfeed and rapids all round, power draw bar, 3 axis digital
read out, light, coolant. Serial no: 281. Year 1996
TOM SENIOR MODEL 1 UNIVERSAL MILL, table 715mm x 160mm,
Longitudinal powerfeed, complete with 200mm rotary table, dividing head with
130mm 3 jaw chuck and tail stock, collet chuck. Serial no: 3337.
LATHES
BOXFORD AUD CENTRE LATHE, 20” between centres, 3 jaw chuck, Fixed steady, quick
change tool post, screw cutting gear box, Speeds 40-1400 rpm. Serial no: 32276
BOXFORD TUD CENTRE LATHE, 20” between centres, 3 jaw chuck,
Face plate, travelling steady, speeds 210-1400 rpm, 3 phase. Serial no: 32274
BOXFORD TUD CENTRE LATHE, 20” between centres, 3 and 4 jaw chucks, catch plate,
quick change tool post. Serial no: 32275
COLCHESTER STUDENT MKII CENTRE LATHE, gap bed, metric, 600mm between centres,
3 and 4 jaw chucks, face plate, fixed steady, Quick change tool post, coolant. Serial no:
72471.
COLCHESTER TRIUMPH 2000 CENTRE LATHE, gap bed, imperial, 50” between centres,
3 jaw chuck, quick change tool post, fixed and travelling steadies, ainjest. Serial no:
28269.
EMCO MAXIMAT SUPER 11 CENTRE LATHE, straight bed, 650mm between centres,
140mm centre height over bed, 150mm diameter over cross slide, 3 jaw chuck, quick
change tool post, speeds 55-2200 rpm, Light, single phase. Serial no: 8502002.
HARRISON M250 CNC LATHE, Anilam Crusader II control with program saver, 750mm
between centres, 3 and 4 jaw chucks, quick change tool post.
RAGLAN 5” CENTRE LATHE, 20” between centres, 3 and 4 jaw chucks, catch plate, screw
cutting gear box, change gears, variable speed, 3 phase.
HARRISON M300 CENTRE LATHE, 1000mm between centres, metric, gap bed, 3 jaw
chuck, quick change tool post, light, coolant, refurbished. Serial no: 312932.
MISC SHEET METAL
CHAMFER-SAFE SHEET METAL DEBURRER, single phase.
EDWARDS 1245MM X 70MM INITIAL PINCH HAND ROLLS,
Cast frame, wire rolling.
MILLS MIRACLE NO:3 BAR BENDER, capacity of flat iron cold 152mm x 6.4mm, 76mm x
9.5mm or 63.5mm x 13mm, round or square bar Up to 22.5mm. On stand Serial no: 4484.
NEW BK SM INITIAL PINCH HAND ROLLS, 1000mm x 1mm capacity, 46mm diameter
rolls, 2 speed
NEW BK PBM 30 RING ROLLERS, capacities: angle 40 x 40 x 5mm,
Solid bar 30mm, flat on edge 50 x 10mm, flat in flat 80 x 10mm,
Box section 40 x 40x 2mm.
TIMESAVERS CS-360 DDM DEBURRING AND GRAINING.
Bed width 910mm, disc diameter 1220mm, bed opening 75mm, vacuum conveyer,
variable speed belt and disc, wet machine with coolant and
clarifier system, drying system. Serial no: 25168M.
PRESS BRAKES & FOLDERS
ADIRA / EDWARDS QH 6025 UPSTROKING CNC PRESSBRAKE,
2500mm x 60 ton capacity, Cybelec cnc 7200p 2 axis control, sick light guards,Top and
bottom tooling, 500mm throat. Year 1982.
EDWARDS PEARSON PR3 4100MM X 100 TON CNC PRESSBRAKE,
2 axis Y1 & Y2, Cybelec euro III control, sick machine mounted light guards,
No tooling or backgauge. Year 1996.
EDWARDS PEARSON RT 2 4100MM X 150 TON CNC PRESSBRAKE,
4 axis, Y1, Y2, X and R, with new cybelec dnc 880s 2d windows xp graphic control, 2d
offline programming software, sick machine mounted light guards, No tooling. Serial
no: 93p113.
EDWARDS PEARSON 3050MM X 330 TON DOWN STROKING CNC PRESS /
PUNCH FITTED WITH PLATTEN BED, Swissax Euro III control, sick machine mounted light
guards, Platen size 2560mm x 600mm. serial no: 93P127.
EDWARDS PEARSON PR 5400MM X 500 TON CNC PRESSBRAKE,
3 axis, Y1, Y2 and X, Cybelec DNC 800 control, 4900mm between the frames,
Hydraulic crowning, hydraulic top and bottom tool clamping.
With optional Automation Techniques infeed and unloading system.
Top and bottom tooling., sick light guards. Serial no: 96P222. Year 1996.
GUIFIL PE 20-60 UPSTROKING PRESSBRAKE, 2000mm x 60 ton capacity, top and bottom
tooling, no light guards. Year 1985.
KEETONA HYDROFORM 2032MM X 5MM, Model HUF,
Serial no: 6316060. Year 1980.
KEETONA HYDROFORM 2540MM X 3.1MM, Model HUF, Serial no: 818420.
MMW EPB 1270MM X 2MM BOX AND PAN FOLDER, hand operated,
Treadle clamping of material, segmented top and bottom fingers.
New machine, in stock now.
MMW HPB 2500MM X 1.5MM BOX AND PAN FOLDER, hand operated.
New machine, in stock now.
MMW RANGE OF NEW PRESSBRAKES, from 40 to 1000 tons,
2000mm to 6000mm, manual or cnc, light guards,
please enquire for further details.
MMW RPP 200/300 DOWN STROKING PRESSBRAKE,
Capacity 200 tons x 3200mm, power backgauge with digital read out,
Powered depth stop with digital read out, machine mounted light guards,
Interlocked side and rear guards. New machine, in stock now.
PEARSON 18’3” X 155 TON CNC PRESSBRAKE, 3 axis, Y1, Y2 and X,
Eurogauge fp control, 4920mm between the frames, light guards, top and bottom
tooling. Serial no: 687603.
SHEMACH OS 100-8 UPSTROKING PRESSBRAKE WITH CNC BACKGAUGE, 2500mm x 100
ton capacity, Hurco 6 cnc backgauge,
Machine mounted light guards, top and bottom tooling. Year 1998.
SMT PULLMAX URSVIKEN EKP-CNC 100 3.1 / 255 CNC PRESSBRAKE, 5 axis, Y1,Y2, X, R
and Z, Cybelec cnc control, sick machine mounted light guards, multi-vee bottom tool.
Serial no: 3185. Year 1982.
PRESSBRAKE, 5 axis, Y1,Y2, X, R and Z, Cybelec cnc control, sick machine mounted light
guards, multi-vee bottom tool. Serial no: 3185. Year 1982.
GUILLOTINES
CINCINNATI 1008M MECHANICAL SHEAR, 2500mm x 3.25mm,
Front supports, squaring arm, power backgauge, Magnetic sheet supports. Serial no:
32K09
MMW FS-F5216 TREADLE GUILLOTINE, 1320mm x 1.6mm capacity
Front supports, manual push / pull backgauge. New machines in stock.
MMW RANGE OF NEW HYDRAULIC GUIDED BEAM SHEARS,
6 to 25mm capacity, 2500mm to 6000mm length, with front supports, squaring arm,
rapid blade gap adjustment, variable blade rake, power backgauge, touch and go back
gauge or full cnc, sheet support optional.
Please enquire for further details.
MMW RPG 3112 HYDRAULIC GUIDED BEAM SHEAR,
3100mm x 12mm capacity, front supports, squaring arm, rapid blade gap adjustment,
variable rake, power backgauge with digital read out,
Adjustable length of cut. New machine, in stock now.
PRATT TRIUMPH 600MM X 10MM MECHANICAL GUILLOTINE
Serial no: 2D521
WHG 1280MM X 1.5MM TREADLE GUILLOTINE, with push / pull backgauge.
GRINDERS
ARBOGA EP 308 DOUBLE ENDED PEDESTAL GRINDER,
8” wheels, 3 phase.
BIAX TOOL GRINDER, for carbide scrapper tips, tilting table,
80mm diameter diamond wheel.
CAPCO SURFACE GRINDER, 10” X 5” magnetic chuck, hand operated only.
CONTELYT CADET 200 TOOL LAP GRINDER, 150mm diamond wheel, adjustable angle
table, coolant and dust extraction.
EXE SURFACE GRINDER, hand operated only, 12” x 6” magnetic chuck. JONES & SHIPMAN
540 SURFACE GRINDER, 450mm x 150mm magnetic chuck, dual dials, coolant.
JONES & SHIPMAN 1415 SURFACE GRINDER, 600mm x 300mm Magnetic chuck, metric,
power rise and fall, Coolant and clarifier. Serial no: 96682.
KENT KGS-250 AHD SURFACE GRINDER, 400mm x 200mm
Electro-magnetic chuck, metric, power rise and fall, automatic downfeed,
Manual overhead wheel dresser, one shot lubrication, coolant,
dust extraction, light. Year 1995. Excellent condition.
MORRISFLEX 150MM HORIZONTAL / VERTICAL LINISHER,
7.5kw ( 10 hp ) motor, dust extraction unit. Serial no: 10006B.
RJH 200MM X 25MM DOUBLE ENDED PEDESTAL GRINDER,
3000 rpm, 3 phase.
RJH GIRAFFE BACK STAND DOUBLE ENDED LINISHER,
50mm wheel head 5.5hp, 75mm wheel head 7.5hp.
RJH GORILLA VERTICAL LINISHER, 200mm wide belt, 5.5 hp motor
RJH 100MM VERTICAL BANDFACE LINISHER, mounted on a dust extractor. Serial no:
15111.
RJH 150MM VERTICAL BANDFACE LINISHER, mounted on a dust extractor. Serial no:
12804.
TMT 4” HORIZONTAL LINISHER, table mounted.
TURNER 6” HORIZONTAL LINISHER, table mounted.
VICEROY 8” DOUBLE ENDED PEDESTAL GRINDER, with polishing spindle attachment.
WELDERS & PLASMA CUTTERS
BUTTERS 300 AMP MIG WELDER, remote wire feed.
CEA 20 KVA SPOT WELDER, pneumatic foot pedal, water cooled.
Serial no: 45673.
KEMPPI KEMPOWELD 4000 MIG WELDER, 400amp capacity,
Remote wire feed unit.
KEMPPI KEMPOMAT 250 MIG WELDER, 250amp capacity.
KEMPPI MASTER 2200 INVERTER TIG WELDER, 3 phase.
MUREX TRANSTIG AC/DC 255 SQUAREWAVE, 250 amp capacity, with foot pedal, water
cooled.
MUREX TRANSMIG 400 MIG WELDER, 400 amp capacity,
Remote wire feed.
OXFORD 180 AMP OIL COOLED ARC WELDER, single phase.
OLYMPIC LD 185AMP ARC WELDER, single phase.
OLYMPIC 220 AMP OIL COOLED ARC WELDER, 3 phase.
TECNA HAND HELD SPOT WELDER, 63 kva maximum, kva 50% 23. Serial no: 3303. Year
1992.
PRESSES
EDWARDS No.4A FLYPRESS ,9’’ Throat, 6’’ Daylight, on stand
HI-TON 50 TON HYDRAULIC `C’ FRAME PRESS WITH 8 STATION INDEXING TABLE, model
RD 928 332, serial no: 3760.
JONES & SHIPMAN ARBOUR PRESS, 150mm throat, 270mm daylight,
On stand. Serial no: 8510-002.
NORTON 4 FLYPRESS, 5” throat, 7” daylight, on stand.
NORTON 50 TON HYDRAULIC PLATTEN PRESS,
platten size 50” x 37½”, daylight 24¾.
NORTON No. 6G (Gang Press) FLYPRESS, with 21” x 11” bed. (O)
RHODES 160 TON TWIN SLIDE DOWN STROKING HYDRAULIC PRESS, 160 ton capacity
per slide, platten size 1500mm x 1350mm,
Stroke 30-700mm, distance from bed plate to slide up 1000mm,
Fast approach 300mm/sec, pressing speed 55mm/sec, return speed 270mm/sec, 50 ton
die cushion with 125mm stroke, main motors 75kw each.
Serial no: 17736. Year 1998.
SIMPKIN No: 5 FLYPRESS, 230mm daylight, 250mm throat.
SWEENEY & BLOCKSIDGE No. 2 FLYPRESS, 160mm daylight, 90mm throat.
SWEENEY & BLOCKSIDGE No. 6 FLYPRESS, 9” daylight, 6” throat.
DRILLING MACHINES
HERBERT BANK OF 4 DRILLS, all 3 morse taper,1 off hand feed,
2 off powerfeed and 1 with tapping, table 46” x 15”, throat depth 7½”,
Rise and fall table, coolant.
MEDDINGS DRILTRU BENCH DRILL, 13mm capacity,
speeds 500-4000 rpm. Serial no: DT4697.
MEDDINGS LF PILLAR DRILL, 12mm capacity, speeds 500-4000 rpm,
Handfeed only. Serial no: 60811.
MEDDINGS 10 STW ELECTRONIC HIGH SPEED DRILL,
10mm capacity, variable speed 500 – 3000 rpm, single phase.
POLLARD 1 AX PILLAR DRILL, 1 morse taper, speeds 500-1500 rpm,
Rise and fall table. Serial no: 16459A.
POLLARD 100A/1 PILLAR DRILL, 1 morse taper, speeds 210-1210 rpm, auto reverse for
tapping. Serial no: 29986C.
POLLARD 110/A2 BANK OF 2 DRILLS, 2 x 2 morse taper heads,
Handfeed only, speeds 520-2700 rpm, rise and fall heads and table.
Serial no: 28880A.
STARTRITE MERCURY PILLAR DRILL, 13mm capacity.
Serial no: 91559.
STARTRITE MERCURY PILLAR DRILL, ½” capacity.
VICEROY MODEL 20 PILLAR DRILL, 2 morse taper,
speeds 420-2150 rpm, rise and fall table.
MISCELLANEOUS
AQA GRANITE SURFACE TABLE, 460mm x 460mm, grade 1, on stand.
BENSON INDUSTRIAL WORKSHOP HEATER MODEL RSUHA 80, natural gas, ceiling
suspended, with control, max out put 78,500 btu’s.Year 2002.
BENSON INDUSTRIAL WORKSHOP HEATER MODEL AG 150, natural gas, free standing
unit with control, max out put 189,300 btu’s. Year 2001.
COLCHESTER/HARRISON FACEPLATES, 650mm
COLCHESTER/HARRISON FACEPLATES , 510mm.
DCE DRYTEX MK2 DUST EXTRACTION UNIT, to suit J & S grinder or similar. 3 phase.
ELECTAC F 60 A-2 ELECTROSTATIC FUME EXTRACTOR,
240 volt. Year 1996.
FOLEY BELLSAW HAND SAW FILER, Model No. SF1000, Serial No. 2838
FOLEY BELLSAW RE-TOOTHER, Model SR1000, Serial No. 1664
FREDDY MARK 1 VM SUMP CLEANER, approx 100 gallon tank,
Swarf collector, single phase, on trolley.
HERBERT TM 7 VERTICAL BROACH..
ITW MIMA ECOMAT-600 PALLET WRAPPER, semi automatic, 1600mm turn table, single
phase. Serial no: 752716-1. Year 2000.
LUREM C268 UNIVERSAL WOODWORKER, with 250mm wide planner / thicknesser,
300mm diameter rip / dimension saw, spindle moulder
Mortiser. 3 kw main motor. 3 phase. Serial no: GS019.
MODUS AIR LIMITED MODEL 18 PB NW DUST EXTRACTION UNIT, 7.5Kw motor, 250mm
diameter inlet ducting, 4 dust collection bags plus cyclone. Serial no: C10495.
MTS PUNZONATRICE BOX SECTION / TUBE DOUBLE SIDED
PUNCH / SLOTTER, 4000mm max length, internal mandrel,
Siemens Simatic S5 programmable controller. Year 1998.
OSTER 310 PIPE THREADER, 1/8” – 2” capacity, 240 volt, on trolley.
PLYMOVENT MFE DUST / FUME EXTRACTION SYSTEM, complete with 2 off 3 mtr articulating
arms and 1 off 4 mtr arm.
ROTHEN BERGER HYDRAULIC PIPE BENDER, hand operated,
Formers 3/8, ½, ¾ , 1, 1¼, 1½, and 2”.
SAMECA MONOSAM D32 CNC BARFEED, 3000mm long, with
20mm and 32mm tubes.
STARTRITE WOOD DUST EXTRACTION UNIT, 240 volt.
TAYLOR HOBSON PANTOGRAPH, 3 phase.
TIMESAVERS CS-360 DDM DEBURRING AND GRAINING.
Bed width 910mm, disc diameter 1220mm, bed opening 75mm, vacuum conveyer,
variable speed belt and disc, wet machine with coolant and clarifier system, drying
system. Serial no: 25168M..
TUBELA UNI 42 PIPE BENDER, with 1¼” and 13/8” formers, single phase. Year 1997.
YOSHIKAWA RIVETING AND INSERTING MACHINES,
1 off US- 36M, 4 off US-36 and 4 0ff US-66.
Contact: Compton Road, Wellingborough, Northants, NN8 1QG
Tel: 0845 230 6843 Fax: 0845 230 9316 E-mail: machinery@mmwebb.com
Website: www.mmwebb.com |
