|
MACHINE TOOLS SURPLUS TO REQUIREMENTS
MACHINE TOOLS SURPLUS
TO REQUIREMENTS
DENFORD Cyclone CNC Lathe, Swing
over bed 310mm, Max turned length
300mm. Spindle bore 42mm. 6 station
turret, spindle speeds 40-4000rpm, 7kw
drive motor 200mm power chuck,
Conversation CNC control, Ex college,
1995 £3,500.00
DENFORD TRIAC Vertical machining
centre, BT 30 taper CNC conversational
control, 12 station tool changer, 310mm x
310mm x 200mm, 300rpm, Spindle
tooling, 1995, £3,500.00
EUROPA MILLTECH, Turret milling
machine, 42” x 9” table, R8 Spindle, Varispeed
3 HP motor, Power feed to table, 2
axis DRO, Coolant, Ex College, £3,250.00
JONES & SHIPMAN 1400L Hydraulic
surface grinder, 24” x 8”, Mag chuck, Dust,
Coolant filtration, 1992, £5,750.00
JONES & SHIPMAN 540 Hydraulic
surface grinder, 18” x 6”, Mag chuck, Dust
extractor, Ex College £2,750.00
JONES & SHIPMAN 1310, Hydraulic
Universal grinder, 18” x10”, Chuck,
Coolant, Ex College, £2,750.00
MEDDINGS LF2,2 MT 5/8”Floor Drill.
£450.00
COLCHESTER Triumph 2000 30”BC,
Straight bed Lathe, 3jaw chuck, QCTP,
Coolant, £2,250.00
HARRISON M300 swing 330mm, 750mm
BC, straight bed Lathe, 3 jaw chuck, 4 Jaw
chuck QCTP, 1998, £3,250.00
DELAPENA Speed hone. Automatic,
complete with standard equipment
£800.00
BRIDGEPORT BRJ2 Turret Mill, Manual
Head, 2 speed 50-4600 rpm,DRO, 42” x 9”
table, Power feed, £1,750.00
STARTRITE 24 T 10 Vertical Bandsaw
£950.00
ALEXANDER Rapidor, 6” Power
hacksaw. £450.00
MARVEL 8 MK1 Vertical Tilting and
sliding head bandsaw 20”capacity,
complete with coolant and blade. £950.00
VACBLAST Cabinet 1m square with DCE
Dust extraction System, and bag of ali
oxcide. £1,250.00
FLYPRESS Number 6 on stand £200.00
SAMECA Monosam, 4m bar feed, 65mm
capacity, with guide tubes, Oil injection
pack, 1999 £950.00
HYDRAVANE PU37 Compressor 37CFM.
£650.00
ON SITE IN KENT. FOR MORE DETAILS
Contact: ON SITE IN KENT. FOR MORE DETAILS
Tel:01435-882342.
Mobile: 07721-430800. |
