|
M & M WEBB & SONS LTD
SAWING MACHINES
BAUER VERTICAL BANDSAW, throat 395mm, daylight 225mm,
Table 520mm x 460mm. blade welder. year 1995.
BAUER VG 450 VERTICAL MITRE CUTTING BANDSAW, Hydraulic mitre adjustment, cutting capacities 90° 450mm x 490mm, 45° left and right 450mm x 320mm, 30° right 450mm x 230mm, Hydraulic feed, hydraulic clamping, digital display of mitre angle, coolant. Year 1997.
FOM MIRAGE AUTOMATIC ALUMINIUM CUT OFF SAW,
400mm blade, feed device maximum stroke 600mm, horizontal and vertical
clamping, mist spray lube. Serial no:XZ 10029. Year 1997.
HYD-MECH S-20 PIVOT STYLE HORIZONTAL BANDSAW,
Rectangle capacity 330mm x 457mm at 90°, round capacity 330mm.
Mitre up to 60°, coolant. New machine.
LFS 30/1000 FRICTION SAW FOR CUTTING GRILLE FLOORING,600mm blade, 22 kw main motor, length of cut from 1100mm,Double sided clamping, variable speed feed, input and output rollerways with manual measuring head. Made to order.
JAESPA ASH 15 VERTICAL BANDSAW, 1500mm throat, 1200mm daylight between the guides, the machine travels on rails by hydraulic feed cylinder, the blade is turned so the machine cuts to the back of the throat, hydraulic blade tension and guide rod cylinder up and down. Serial no: 683324.
KALTENBACH KKS 401 UPSTROKING COLD SAW, with horizontal and vertical
clamping, with nc touch and go measuring head.
KALTENBACH TL 400 NON-FERROUS SAW, 400mm blade,
Manual up-cutting, pneumatic clamping, mist spray coolant.Serial no: 31475.
KASTO GKS 400 AU AUTOMATIC COLDSAW, with 1200mm shuttle feed x 3. Horizontal and vertical clamping, 400mm blade, coolant
MEP SHARK 260 CCS SWIVEL HEAD HORIZONTAL BANDSAW,
Mitre up to 60°, capacities up to 225mm round, 200mm square,270mm x 200mm rectangle, hydraulic downfeed, coolant. New machine.
MEP SHARK PH 261 SWIVEL HEAD HORIZONTAL BANDSAW,
Pull down, mitre up to 60°, capacities 210mm round, 200mm square,240mm x 160mm rectangle, coolant. New machine.
MEP FALCON 275 PULL DOWN COLD SAW, mitre 45° left or right hand, capacities up to 80mm round, 70mm square, 100mm x 60mm rectangle. On pedestal, coolant. New machine.
MEP SHARK 281 CCS SWIVEL HEAD HORIZONTAL BANDSAW,
Mitre up to 60°, hydraulic downfeed, quick positioning vice, 2 speed,
Capacities 250mm round, 230mm square, 280mm x 200mm rectangular,
Coolant. New machine.
METORA UMB 220 HORIZONTAL BANDSAW, 220mm diameter,
Coolant. Serial no: 411045
QUALTERS & SMITH 6” POWER HACKSAW, coolant.
SIMEC MEC 120 M 1L AUTOMATIC COLDSAW, with 6000mm bunker feeder, manual mitre left or right hand. Serial no: 3486. Year 2000.
STARTRITE 20 RWS VERTICAL BANDSAW, 500mm throat,
Height under guides 250mm, speeds 50-3000 ft/per minute,
table 500mm x 500mm, rack and pinion table feed, blade welder.
THOMAS TRAD 270 PULL DOWN HORIZONTAL BANDSAW,
0-60° mitre, quick release clamping, coolant. Year 2000
WICKSTEED 6” POWER HACKSAW, coolant.
MILLING MACHINES
CHEN-HO CH-V 1600S TURRET MILL, table 1270mm x 250mm,
Metric, vari-speed head, longitudinal powerfeed, R8 spindle, light, coolant,
Splash tray. Serial no: 95079. Year 1995.
COMET X8130 UNIVERSAL TOOL ROOM MILL, standard table 750mm x 300mm, universal swivelling table 625mm x 250mm 40 int spindles, rise, fall and longitudinal powerfeeds and rapids. Serial no: CNM002.
KONDIA FV 1 TURRET MILL, table 1525mm x 230mm, 30 int spindle,
Belt change head, longitudinal powerfeed, dual dials, digital read out,
Coolant.
MOSTANA 6M 13Y VERTICAL MILLING MACHINE, Metric,
Table 1700mm x 400mm, longitudinal travel 1000mm, spindle nose to table 450mm, speeds 40-2000 rpm, powerfeed and rapids all round, power draw bar, 3 axis digital read out, light, coolant. Serial no: 281. Year 1996
XYZ KRV 3000 SLV TURRET MILL, table 1475mm x 305mm, Vari speed head, 40 int spindle, powerfeed on x and y axis, power rise and fall to knee, 2 axis digital read out. Serial no: 6454.
LATHES
COLCHESTER TRIUMPH 2000 CENTRE LATHE, 30” between centres, straight bed, imperial, 3 and 4 jaw chucks, 4 way tool post, Fixed and travelling steadies, face plate, catch plate, hydraulic copying. Serial no: 17687.
EXCEL 1220 CENTRE LATHE, 500mm between centres, gap bed, metric, 300mm swing over bed, 170mm swing over cross slide, swing in gap 430mm, speeds 60-2000 rpm. Complete with 3 and 4 jaw chucks, fixed and travelling steadies, face plate, coolant. Choice of 3.
HARRISON M250 CNC LATHE, Anilam Crusader II control with program saver, 750mm between centres, 3 and 4 jaw chucks, quick change tool post.
HARRISON M300 CENTRE LATHE, 750mm between centres, gap bed,
3 jaw chuck, catchplate, quick change tool post, capstan attachment,
Collet attachment.
MISC SHEET METAL
BOSCHERT LB12 225MM X 4MM CORNER NOTCHER. Serial no: 1411.
Year 1989.
CHAMFER-SAFE SHEET METAL DEBURRER, single phase.
FARLEY PHOENIX CNC PLASMA CUTTER, maximum cutting area 3,500mm x 10,000mm, with PDF 32 cnc control, 2 off tables 2000mm x 3000mm, 2 off Hypertherm HD 3070 high definition plasma units,
Dust and fume extraction unit. Year 1997.
LVD SHAPE DELTA 1000 LB CNC PUNCH, 20 ton capacity,
punching area 2025mm x 1025mm, 18 station turret, 4 auto index,
extensive tooling, guards. Year 1994.
NEW BK HAND SWAGER. Capacity 1.25mm, Roll diameter 63mm, throat depth, 250mm, With 7 sets of wheels. Serial No. 20 3005 333
NEW BK SM INITIAL PINCH HAND ROLLS, 1000mm x 1mm capacity, 46mm diameter rolls, 2 speed
NEW BK PBM 30 RING ROLLERS, capacities: angle 40 x 40 x 5mm,
Solid bar 30mm, flat on edge 50 x 10mm, flat in flat 80 x 10mm,
Box section 40 x 40x 2mm.
NEW BK KSM INITIAL PINCH HAND ROLLS, 1280mm x 86mm rolls, Top slip, 2 speed, Serial No. 1340 04 026
TIMESAVERS CS-360 DDM DEBURRING AND GRAINING.
Bed width 910mm, disc diameter 1220mm, bed opening 75mm, vacuum conveyer, variable speed belt and disc, wet machine with coolant and
clarifier system, drying system. Serial no: 25168M.
PRESS BRAKES & FOLDERS
EDWARDS PEARSON SE 2500MM X 65 TON CNC PRESSBRAKE,
2 axis, Euro Cybelec control, sick machine mounted light guards, selection
of tooling. Serial no: 2767. Year 1990.
EDWARDS PEARSON PR3 4100MM X 100 TON CNC PRESSBRAKE,2 axis Y1 & Y2, Cybelec euro III control, sick machine mounted light guards,
No tooling or backgauge. Year 1996.
EDWARDS PEARSON RT 2 4100MM X 150 TON CNC PRESSBRAKE,
4 axis, Y1, Y2, X and R, with new cybelec dnc 880s 2d windows xp graphic control, 2d offline programming software, sick machine mounted light guards, No tooling. Serial no: 93p113.
EDWARDS PEARSON 3050MM X 330 TON DOWN STROKING CNC PRESS / PUNCH FITTED WITH PLATTEN BED, Swissax Euro III control, sick machine mounted light guards, Platen size 2560mm x 600mm. serial no: 93P127.
GUIFIL PE 20-60 UPSTROKING PRESSBRAKE, 2000mm x 60 ton capacity, top and bottom tooling, no light guards. Year 1985.
KEETONA HYDROFORM 2032MM X 5MM, Model HUF,
Serial no: 6316060. Year 1980.
KEETONA HYDROFORM 2540MM X 3.1MM, Model HUF, Serial no: 818420.
MORGAN RUSHWORTH PBPF
POWER FOLDER, 2000mm x 4.75mm capacity, manual push pull backgauge. Serial no: 9841AX.
MORGAN RUSHWORTH PBPF POWER FOLDER, 2000mm x 4.75mm capacity, manual push pull backgauge. Serial no: 9841AX.
PEARSON 18’3” X 155 TON CNC PRESSBRAKE, 3 axis, Y1, Y2 and X,
Eurogauge fp control, 4920mm between the frames, light guards, top and bottom tooling. Serial no: 687603.
SHEMACH OS 100-8 UPSTROKING PRESSBRAKE WITH CNC BACKGAUGE, 2500mm x 100 ton capacity, Hurco 6 cnc backgauge,
Machine mounted light guards, top and bottom tooling. Year 1998.
SMT PULLMAX URSVIKEN EKP-CNC 100 3.1 / 255 CNC PRESSBRAKE, 5 axis, Y1,Y2, X, R and Z, Cybelec cnc control, sick machine mounted light guards, multi-vee bottom tool. Serial no: 3185. Year 1982.
TRUMPF TRUMABEND 3050MM X 125 TON CNC PRESSBRAKE,
3 Axis Y1, Y2 and X plus auxiliary R, Delem 58 cnc control,
adjustable bottom tool cradle, Sick machine mounted light guards, no tooling. Serial no: 50835302. Year 1992.
GUILLOTINES
CINCINNATI 1008M MECHANICAL SHEAR, 2500mm x 3.25mm,Front supports, squaring arm, power backgauge, Magnetic sheet supports. Serial no: 32K09
MORGAN RUSHWORTH SC 3000 / 4 GUILLOTINE, 3050mm x 4mm Capacity, front supports, squaring arm, Elgo touch and go backgauge.
Serial no: 1045MW194/198.
PRATT TRIUMPH 600MM X 10MM MECHANICAL GUILLOTINE
Serial no: 2D521
WHG 1280MM X 1.5MM TREADLE GUILLOTINE, with push / pull backgauge.
GRINDERS
BIAX TOOL GRINDER, for carbide scrapper tips, tilting table,
80mm diameter diamond wheel.
CAPCO SURFACE GRINDER, 10” X 5” magnetic chuck, hand operated only.
EXE SURFACE GRINDER, hand operated only, 12” x 6” magnetic chuck.
EXCEL NO:3 SURFACE GRINDER, with 24” x 8” magnetic chuck,
Power rise and fall to grinding wheel, coolant.
EXCEL / PINNACLE PKGS 250 HYDRAULIC SURFACE GRINDER,
500mm x 250mm electro magnetic chuck, power rise and fall to head,
Dust extraction, coolant. Serial no: 9224139.
JONES & SHIPMAN 540 SURFACE GRINDER, 18” x 6” magnetic chuck, coolant. JONES & SHIPMAN 540 P
SURFACE GRINDER, 18” x 6” magnetic chuck, power rise and fall to workhead, dust extraction. Serial no: 67152.
JONES & SHIPMAN 1415 SURFACE GRINDER, 600mm x 300mm Magnetic chuck, metric, power rise and fall, Coolant and clarifier. Serial no: 96682.
KENT KGS-250 AHD SURFACE GRINDER, 400mm x 200mm
Electro-magnetic chuck, metric, power rise and fall, automatic downfeed,
Manual overhead wheel dresser, one shot lubrication, coolant,
dust extraction, light. Year 1995. Excellent condition.
MORRISFLEX 150MM HORIZONTAL / VERTICAL LINISHER,
7.5kw ( 10 hp ) motor, dust extraction unit. Serial no: 10006B.
RJH ANTELOPE 100MM WIDE VERTICAL LINISHER, mounted on a dust
extraction unit, 1HP, Serial No:10767
RJH 4” HORIZONTAL LINISHER, free standing.
RJH 6” HORIZONTAL LINISHER, free standing.
RJH GIRAFFE BACK STAND DOUBLE ENDED LINISHER,
50mm wheel head 5.5hp, 75mm wheel head 7.5hp.
RJH GORILLA VERTICAL LINISHER, 200mm wide belt, 5.5 hp motor
RJH GRYPHON DOUBLE ENDED PEDESTAL GRINDER,
200mm diameter wheels. Serial no: 322927.
TMT 4” HORIZONTAL LINISHER, table mounted.
VANCO 1” VERTICAL LINISHER, on stand, 3 phase.
WELDERS & PLASMA CUTTERS
BUTTERS 300 AMP MIG WELDER, remote wire feed.
CEA 20 KVA SPOT WELDER, pneumatic foot pedal, water cooled.
Serial no: 45673.
CEBORA PRO F 70 PLASMA CUTTER, 70 amp capacity, compressed air required.
ESAB C 300i MIG / MAG, PULSE MIG AND MMA WELDER,
300 amp capacity, on trolley. Year 2006. AS NEW.
KEMPPI MASTER 2200 INVERTER TIG WELDER, 3 phase.
MERITUS PS 8 B SPOT WELDER, foot operated, 8 kva, 1 phase,
415 volts. Choice of 2 machines.
MERITUS AS 15 BCT PNUEMATIC SPOT WELDER, 15 kva,
415 volts. Choice of 5 machines.
MERITUS RAS 30 A3 PNEUMATIC SPOT WELDER, 30 kva,
415 volts. Serial no: 29154.
TECNA HAND HELD SPOT WELDER, 63 kva maximum, kva 50% 23. Serial no: 3303. Year 1992.
PRESSES
EDWARDS No.4A FLYPRESS ,9’’ Throat, 6’’ Daylight, on stand
EDGEWICK ARBOUR PRESS, 10” throat, 16” daylight, on stand.
HI-TON 50 TON HYDRAULIC `C’ FRAME PRESS WITH 8 STATION INDEXING TABLE, model RD 928 332, serial no: 3760.
JONES & SHIPMAN ARBOUR PRESS, 150mm throat, 270mm daylight, On stand. Serial no: 8510-002.
NORTON 4 FLYPRESS, 5” throat, 7” daylight, on stand.
NORTON 5S FLYPRESS on stand
NORTON 50 TON HYDRAULIC PLATTEN PRESS,
platten size 50” x 37½”, daylight 24¾.
NORTON No. 6G (Gang Press) FLYPRESS, with 21” x 11” bed. (O)
RHODES 160 TON TWIN SLIDE DOWN STROKING HYDRAULIC PRESS, 160 ton capacity per slide, platten size 1500mm x 1350mm,Stroke 30-700mm, distance from bed plate to slide up 1000mm,
Fast approach 300mm/sec, pressing speed 55mm/sec, return speed 270mm/sec, 50 ton die cushion with 125mm stroke, main motors 75kw each.
Serial no: 17736. Year 1998.
SIMPKIN No: 5 FLYPRESS, 230mm daylight, 250mm throat.
SWEENEY & BLOCKSIDGE No. 2 FLYPRESS, 160mm daylight, 90mm throat.
SWEENEY & BLOCKSIDGE No. 6 FLYPRESS, 9” daylight, 6” throat.
ZTS LE-250-C ECCENTRIC POWER PRESS, 250 ton capacity,Stroke 30-140mm, stroke adjustment 110mm, daylight 400mm, bed area 1100mm x 800mm, 45 strokes per minute. Serial no: 2301009.
DRILLING MACHINES
ARCHDALE PILLAR DRILL, 4 morse taper, speeds 40-2000 rpm,15” throat depth, 26” daylight, 12” spindle travel, compound table
35” x 15”, coolant.
FOBCO STAR PILLAR DRILL, 12mm capacity, speeds 470-4250 rpm.
HERBERT 3 MORSE TAPER PILLAR DRILL, 74-2850 rpm,
Handfeed only, rise and fall table, coolant.
MEDDINGS A10 ARTICULATED HEAD DRILL, 600mm articulated arm, table 600mm x 600mm, 2 morse taper, speeds 80-4000 rpm, handfeed only, rise and fall table. Serial no: 028461.
MEDDINGS DRILTRU BENCH DRILL, 13mm capacity,
speeds 500-4000 rpm. Serial no: DT4697.
MEDDINGS LF1 PILLAR DRILL, 13mm capacity,
speeds 500-4000 rpm. Serial no: 610782.
MEDDINGS 10 STW ELECTRONIC HIGH SPEED DRILL,
10mm capacity, variable speed 500 – 3000 rpm, single phase.
POLLARD 1 AX PILLAR DRILL, 1 morse taper, speeds 500-1500 rpm,Rise and fall table. Serial no: 16459A.
POLLARD 110/A2 BANK OF 2 DRILLS, 2 x 2 morse taper heads,
Handfeed only, speeds 520-2700 rpm, rise and fall heads and table.
Serial no: 28880A.
POLLARD 210P PEDESTAL DRILL, 3 morse taper, geared head,
Speeds 56-1265 rpm, powerfeed, 8” quill movement, rise and fall head and table, coolant. Serial no: 24665c.
SEALEY 2 MORSE TAPER BENCH DRILL, single phase.
STARTRITE EFI PILLAR DRILL, 3 morse taper, speeds 75-2800 rpm,
Rise and fall head and table.
STARTRITE MERCURY PILLAR DRILL, 13mm capacity.
Serial no: 91559.
STARTRITE MERCURY PILLAR DRILL, ½” capacity.
MISCELLANEOUS
ADDISON / PEDRAZZOLI BEND MASTER 2T-32/5A TWIN HEAD
CNC PIPE BENDER, 5 Axis, maximum, distance between heads 4200mm,
Minimum distance between heads 300mm, Max capacity 32mm x 1.5mm,
Cybelec Dnc 7000 control.
BENSON INDUSTRIAL WORKSHOP HEATER MODEL RSUHA 80, natural gas, ceiling suspended, with control, max out put 78,500 btu’s.Year 2002.
BENSON INDUSTRIAL WORKSHOP HEATER MODEL AG 150, natural gas, free standing unit with control, max out put 189,300 btu’s. Year 2001.
COLCHESTER/HARRISON FACEPLATES, 650mm
COLCHESTER/HARRISON FACEPLATES , 510mm.
CROWN BATTERY OPERATED PEDESTRIAN PALLET TRUCK,
3000LB lift capacity, 150” lift, with tilt, battery charger. Serial no: 1574W.
ELECTAC F 60 A-2 ELECTROSTATIC FUME EXTRACTOR,
240 volt. Year 1996.
FARLEY PHOENIX CNC PLASMA CUTTER, maximum cutting area 3,500mm x 10,000mm, with PDF 32 cnc control, 2 off tables 2000mm x 3000mm, 2 off Hypertherm HD 3070 high definition plasma units,
Dust and fume extraction unit. Year 1997.
FOLEY BELLSAW HAND SAW FILER, Model No. SF1000, Serial No. 2838
FOLEY BELLSAW RE-TOOTHER, Model SR1000, Serial No. 1664
FREDDY MARK 1 VM SUMP CLEANER, approx 100 gallon tank,
Swarf collector, single phase, on trolley.
HERBERT TM 7 VERTICAL BROACH..
ITW MIMA ECOMAT-600 PALLET WRAPPER, semi automatic, 1600mm turn table, single phase. Serial no: 752716-1. Year 2000.
MODUS AIR LIMITED MODEL 18 PB NW DUST EXTRACTION UNIT, 7.5Kw motor, 250mm diameter inlet ducting, 4 dust collection bags plus cyclone. Serial no: C10495.
OSTER 310 PIPE THREADER, 1/8” – 2” capacity, 240 volt, on trolley.
SAMECA MONOSAM D32 CNC BARFEED, 3000mm long, with
20mm and 32mm tubes.
SEALEY WF 10 1 TON ENGINE HOIST ON WHEELS, hydraulic pump up.
SOCCO AUTOMATIC SAW BLADE SHARPENER MODEL SG-500 CNC. ,
CNC. 415 Volts, 50 Hertz, saw blade diameter 70- 500, tooth pitch 24mm Max, Grinding tooth number 10T- 998T, saw blade thickness 8mm Max. Serial No. 0398S 500CNC01.
TIMESAVERS CS-360 DDM DEBURRING AND GRAINING.
Bed width 910mm, disc diameter 1220mm, bed opening 75mm, vacuum conveyer, variable speed belt and disc, wet machine with coolant and clarifier system, drying system. Serial no: 25168M..
TUBELA UNI 42 PIPE BENDER, with 1¼” and 13/8” formers, single phase. Year 1997.
TUBELA UNI 60 PIPE BENDER, with 1¼” and 1½” formers, single phase. Year 1998.
YOSHIKAWA RIVETING AND INSERTING MACHINES,
1 off US- 36M, 4 off US-36 and 4 0ff US-66.
Contact: Compton Road, Wellingborough, Northants, NN8 1QG
Tel: 0845 230 6843 Fax: 0845 230 9316 E-mail: machinery@mmwebb.com
Website: www.mmwebb.com |
