The No. 1 source for Industrial, Agricultural & Commercial needs for over 40 years
Category Carpet Tiles
Carpet tiles are pieces of carpet cut into squares usually 50cm x 50cm that are generally used in a commercial setting only. Each carpet tile is coated with a pressure-sensitive glue on the base, which holds them in place in most day to day scenarios, but they can easily be removed to spread the wear with tiles in less worn areas. Carpet tiles also have the advantage of in the event of any carpet being damaged e.g. by spillage or minor burn, only very few, possibly only one tile has to be replaced.
Sorry, but there aren't any products, auctions or services under that category. Why not try to search with a keyword?
This floor mounted and versatile machine has a large material capacity: Mild Steel 60mmod x 2mm, Stainless Steel of 54mmod x 4mm and upto 2”nb Gas Pipe. Plus it can bend other more specialised materials such as CDS and T45. Contact us for advice.
You can also add the optional Mandrel attachment and convert this into a Mandrel bender to do as tight as 2D radii bends without tube deformation. Its capacity here is 2”od x 2mm Stainless Steel.
The digital display on the Tube Bender CBC UNI70D is for the inputting and control of the bending angle. And you have the ability to program up to 50 memories, each holding 9 different bend angles. This is ideal for multiple but different bends along the length of a piece of tube. When in operation the machine automatically jumps to the next angle for you, so all you need to do is adjust the material to its stop, clamp it up via the quick action device and hold the two buttons while the UNI accurately performs your bend. It also has an automatic return saving you time as you can be removing the bent tube and getting the next tube ready for installation.
The Tube Bender CBC UNI70Dis a twin speed, digitally controlled, motorised Tube, Pipe, Square and Bar bending machine. This machine is made to order.
A maximum bend angle of 200˚.
A Quick Action Guide/Roller Positioning device is included as standard.
Standard bending radii is 3D & 4D.
415v three phase.
Packed in a protective wooden transport case.
Stock: 2/3weeks from order
£7,699.00 exc. VAT
UNI70D’s material capacity:
Ø60mmod x 4mm hard & soft copper and annealed brass tubes